My list: 

List is empty

SensoPart Press Releases

Blue light sensor in the packaging industry

Transnova RUF employs subminiature sensor with blue light LED

Photoelectric proximity switches are required in a packaging line for plastic bottles to check that the grippers have acutally picked up bottles. As there is only limited space for installation close to the gripper, the application demands extremely small sensors, able to provide relaible, reproducable results despite a difficult detection angle. A subminiature sensor from SensoPart F 10 range, with a blue LED emitter, has proven to be by far the most reliable solution.

gripper s

 Press release:

Blue light sensor in the packaging industry (July 2014)

SensoPart Industriesensorik still looks ahead - even after 20 years

The SME manufacturer of sensors and intelligent camera systems for factory automation celebrates its 20 year jubilee. SensoPart Industriesensorik GmbH was founded in 1994 following the takeover of the insolvent company Schlüter Fotosensorik in Wieden (Todtnau) in the southern Black Forest. The family-run SME has since specialised in the development, manufacture and sale of optoelectronic sensors and vision systems for automation technology.

20 Jahre SensoPart

Press kit:

SensoPart 20 year jubilee (May 2014)
SensoPart 20 year jubilee (May 2014)

F 55 Time-of-Flight sensors with a 5 m range

A far-sighted solution from SensoPart:
Compact time of flight sensors with a 5 m range

SensoPart has added two new sensors to its F 55 compact range: they use time of flight measurement to reliably detect or measure objects of any colour and surface characteristic at a distance of up to 5 metres. The class 1 laser sensors are available with either a digital or analogue ouptut and are much smaller than most distance sensors of the same performance category.  

FT55TOF web

 Press kit:

F 55 TOF sensor (May 2014)

F 55 TOF sensor (May 2014)

  

Vision sensor now with calliper function

Sensor manufacturer SensoPart Industriesensorik has extended its existing range of VISOR® vision sensors with the addition of a new calliper function. The latest algorithms enable the detection of distances, widths and lengths as well as outer and inner diameters with subpixel accuracy. The calliper function is available in both the monochrome and colour versions of VISOR® V20 with a 1.3 megapixel resolution.

VISOR Calliper

 Press kit:

VISOR® with calliper function (April 2014)

VISOR® with calliper function (April 2014)

Miniature contrast sensors in a flexo printing press

Edale and SensoPart: a successful new format

Speed and accurate differentiation of even the lowest contrasts are essential for detection of printing marks on continuous material. Edale, the leading UK manufacturer of flexo printing presses, amongst other machinery, found that SensoPart’s miniature contrast sensor fulfilled both requirements when it came to replacing the standard sensors it previously used, saving not just space but also halving the costs.

 Press Release:

Miniature contrast sensors in a flexo printing press

Small enough to fit on every gripper: SensoPart presents new subminiature LED sensors

SensoPart has expanded its subminiature sensor series in time for the sps ipc drives 2013 exhibition in Nuremberg. The range now offers LED sensors, in addition to laser sensors, including a proximity switch with adjustable background suppression and a blue light version for strongly light-absorbing objects.

subminiature LED sensors

Press kit:

Family of sub-miniature sensors F 10 (Novemer 2013)
Family of sub-miniature sensors F 10 (November 2013)

VISOR® now also speaks Profinet

SensoPart is equipping its VISOR® vision sensors with an extra network interface: the sensors now also support the Profinet IO fieldbus standard in addition to EtherNet/IP and therefore "understand" the two most commonly used industrial Ethernet communication standards.

Vision-Sensoren mit Profinet

Press kit:

VISOR® now also speaks Profinet (November 2013)
VISOR® now also speaks Profinet (November 2013)

Specialists in small part and leading edge detection: autocollimation light barriers from SensoPart

SensoPart’s new laser autocollimation light barriers are the latest additions to its F 25 and F 55 series of optical sensors. The FR 25/55-RLO sensors reliably detect small parts and leading edges, with no blind spots thanks to single eye optics – which means they can even look through bore holes.

autocollimation light barriers

Press kit:

Autocollimation through-beam sensors FR 25/55-RLO (November 2013)
Autocollimation light barriers FR 25/55-RLO (November 2013)

SensoPart’s portfolio on more than 750 pages

SensoPart has published its new complete catalogue, VISOR® and sensors for factory automation’, in time for the sps ipc drives 2013 exhibition in Nuremberg. The entire portfolio of optical sensors, vision sensors, ultrasonic, inductive and capactive sensors and a comprehensive range of accessories are clearly presented on more than 750 pages.

SensoPart’s portfolio: VISOR® and sensors for factory automation

Press kit:

SensoPart’s portfolio on more than 750 pages
SensoPart’s portfolio on more than 750 pages (November 2013)

Code reader for patient safety

Medicines are safety-critical products – counterfeit products with ineffective or incorrectly dosed active ingredients can cause considerable harm to patients. A new EU directive therefore stipulates that all prescription-only medicines are to be given a unique identifier by 2017. High-capacity Vision code readers such as VISOR® V20 from SensoPart Industriesensorik ensure that the codes are correctly printed and are of good readable quality.

v20ocr presse

Press release:

Code reader for patient safety