Skip to main content
VISOR® Code Reader Professional

V10-CR-P3-C-2

Order code:

V10-CR-P3-C-2

Order number:

631-91098

Short description:

VISOR® V10 Code Reader, Professional, 255 jobs each with 255 detectors, C-Mount, LAN interface
Question about the product

Description

Applications

  • Identify

max. 255 jobs with 255 detectors each

  • Pattern matching, Contour: Teach-in and detection of patterns and contours
  • Gray threshold, brightness: Evaluation of brightness
  • Contrast: Evaluation of the contrast
  • Barcode: Barcode: Reading 1D barcodes: EAN, UPC, RSS, 2/5 Interleaved, 2/5 Industrial, Code 32, Code 39, Code 93, Code 128, GS1, Pharmacode, Codabar
  • Datacode: Reading 2D codes: ECC200, QR code, PDF 417, ECC200 GS1
  • OCR: Reading fonts
  • Result processing: Text: Monitoring and calculating detector results
Opticial data
Image chip type

Monochrome

Resolution

SVGA

Number of pixels (H x V) [px]

800 x 600

Imaging chip technology

CMOS

Sensor size ["]

1/3.6

Pixel size [µm]

4.80

Field of view type

C-Mount (field-of-view data depend on the lens used)

Min. field of view (X x Y) [mm]

Abhängig vom gewählten Objektiv

Focus drive

Dependent on the objective lens selected

Functions
Max. number of jobs

255

Max. number of detectors

255

Alignment

Contour comparison, Pattern matching, Edge detection

Available detectors

Pattern matching, Data code, Barcode, OCR, Brightness, Contrast, Grayscale

Result processing

Text

Pre-processing

Arrangement, Filter

Calibration

-

Robotic functions

-

Additional functions

Archiving, Image transmission, individual overlays, Multiple image acquisition, Job checksum, Conditional executions

Hardware

VISOR®

Network protocol

TCP/IP, Profinet, EtherNet/IP, sFTP, SMB, FTP, Service Port

Electronic data
Typical current draw [mA]

350

Type of voltage source

The device must be supplied by a "Class 2" power supply unit.

Readiness delay [ms]

≤ 16,000

Reverse polarity protection

Yes

Overvoltage protection

No

Residual ripple [%]

≤ 5 Vss, level 3

Explanation of residual ripple

EN 61000-4-17

Polarity

PNP/NPN

Short circuit protection

Yes

Input threshold (High)

> UB-1V

Input threshold (Low)

< 3V

Input resistance [kΩ]

> 20

Max. output current [mA]

50

Explanation of max. output current

max. 100 mA on pin 12

Inductive loads

Typ.: Relay 17 K / 2 H, pneumatic valve 1.4 K / 190 mH

Max. output current (total) [mA]

200

Ethernet transmission rate [Mbit/s]

100

Number of switchable IOs

6

Number of outputs

2

Number of inputs

2

Encoder functions

Yes

Mechanical data
Height [mm]

85.0

Length [mm]

45.0

Width [mm]

45.0

Weight [g]

~ 220

Front panel material

PMMA

Housing material

Aluminum (cast)

Connection name

Supply

- Number of pins

12

- Coding

A

- Thread

M12x1

- Material

Metal

- Type

Plug

Connection name

LAN

- Number of pins

4

- Coding

D

- Thread

M12x1

- Material

Metal

- Type

Socket

Explanation of ambient temperature: storage

< 95 % humidity, non-condensing

Protection class

IP 65, IP 67

Explanation of protection class

For C-mount devices, only in combination with protective tube

Vibration and shock resistance

EN 60068-2-6, EN 60068-2-27

Classification Reference Features
Matrix code reader EC002999ETIM 7.0
Matrixcodeleser EC002999ETIM 8.0
Matrix code reader 27280103ECLASS 10.1
Matrix code reader 27280103ECLASS 11.0
Matrix code reader 27280103ECLASS 11.1
Matrix code reader 27280103ECLASS 12.0
Matrix code reader 27280103ECLASS 13.0
Matrix code reader EC002999ETIM 6.0
MB 035

Manfrotto 035 universal clamp

MG 244

Manfrotto 244 Mounting Hinge

MS 244-035

Manfrotto Set with MG 244 and MB 035

ZAP 30

Alignment plate, 30 mm. mounting holes, adhesive pads

MK 45

Mounting, Dovetail mounting bracket, camera or LF45 xx

MA 45

Mounting, Camera Bracket

MB 45

Mounting, Block rod camera

MP 45

Mounting, Plate for camera

MZ 45

Mounting, Adapter for rods

MST 45-20

Mounting, Rod 20 cm camera

MST 45-30

Mounting, Rod 30 cm camera

MST 45-40

Mounting, Rod 40 cm camera

MG 45

Mounting, Hinge camera

MA 45 L

Mounting, Camera Bracket long

MA LR-100/112

Fixing bracket ring light, diameter 100 mm

MA LR-18/112

Fixing bracket ring light, diameter 18 mm

MA LR-26/112

Fixing bracket ring light, diameter 26 mm

MA LR-50/112

Fixing bracket ring light, diameter 50 mm

MA LR-23/112

Fixing bracket ring light, diameter 23 mm

MK 45 L

Mounting, Long Dovetail mounting bracket, V10/V20/V50 or LF45 xx

MG 3A

Mounting, dovetail mounting bracket, 2 axes rotation, hole for mounting rod

MG 3A-MST12

Mounting bracket, adjustable on 3 axes for mounting on M12 rod.

MA 45-63/105 UR

Mounting angle V10/V20 for UR robots, ø 63 mm flange (UR3, UR5, UR10)

DescriptionApplicationIndustry
Effortless Traceability: Displaying code contents, texts, Identification Automotive industry ,
Assembly & Handling ,
Robotics ,
Electronics ,
Food & Beverages ,
Plastics technology ,
Laboratory automation ,
Pharmaceuticals & Cosmetics ,
Solar industry ,
Packaging technology
Visualisation of entire process with SensoWeb Inspection (AI) ,
Identification ,
Positioning ,
Classification AI 		Automotive industry ,
Assembly & Handling ,
Robotics ,
Electronics ,
Food & Beverages ,
Plastics technology ,
Laboratory automation ,
Pharmaceuticals & Cosmetics ,
Solar industry ,
Packaging technology
Monitoring the correct application of lubricant Inspection (AI) Robotics ,
Assembly & Handling
Reading QR codes on plastic film Identification Packaging technology ,
Food & Beverages
Reading a DMC on test tubes Identification Laboratory automation
Identification by means of directly marked codes Identification Automotive industry
Reading the delivery note Identification Automotive industry
Reading DOT codes on vehicle windows Identification Automotive industry
Reading dot-peened data matrix codes on sheet metal parts Identification Automotive industry ,
Assembly & Handling
Reading of lasered datamatrix codes on sheet metal parts Identification Automotive industry ,
Assembly & Handling