VISOR® Object AI

V10C-OAI-A3-W-N-M2-L

Order code:

Order number:

631-91157

Short description:

VISOR® V10 Object AI Color, Advanced, 255 jobs each with 255 detectors, white illumination, narrow field of view, motorized focus, LAN interface, target laser

Opticial data
Image chip type	Color
Light source	LED
Light color	White
Wavelength [°K]	4,500
LED risk category [RG]	1
Explanation of risk category	Acc. to EN 62471
Resolution	SVGA
Number of pixels (H x V) [px]	800 x 600
Imaging chip technology	CMOS
Sensor size ["]	1/3.6
Pixel size [µm]	4.80
Field of view type	Narrow
Focal length [mm]	20.0
Opening angle [°]	10.0
Min. field of view (X x Y) [mm]	14 x 11
Aperture number	2.8
Depth of field	Standard
Focus drive	Motorized
Target laser	Laser red (655 nm)
Laser class	1 (IEC 60825-1)

Functions
Network protocol	TCP/IP, Profinet, EtherNet/IP, sFTP, SMB, FTP, Service Port
Max. number of jobs	255
Max. number of detectors	255
Alignment	Contour comparison, Pattern matching, Edge detection
Available detectors	Pattern matching, Contour, Contour check, BLOB, Brightness, Contrast, Grayscale, Color value, Color area, Caliper, Classification (AI), Color list
Result processing	Numbers
Pre-processing	Arrangement, Filter
Calibration	Board (measurement), Scaling (measurement)
Robotic functions	-
Additional functions	Archiving, Image transmission, individual overlays, Multiple image acquisition, Color channel, color distance and binarization, Multiple detection for contour and pattern matching detector, Job checksum
Hardware	VISOR®

Electronic data
Typical current draw [mA]	350
Type of voltage source	The device must be supplied by a "Class 2" power supply unit.
Readiness delay [ms]	≤ 16,000
Reverse polarity protection	Yes
Overvoltage protection	No
Residual ripple [%]	≤ 5 Vss, level 3
Explanation of residual ripple	EN 61000-4-17
Polarity	PNP/NPN
Short circuit protection	Yes
Input threshold (High)	> UB-1V
Input threshold (Low)	< 3V
Input resistance [kΩ]	> 20
Max. output current [mA]	50
Explanation of max. output current	max. 100 mA on pin 12
Inductive loads	Typ.: Relay 17 K / 2 H, pneumatic valve 1.4 K / 190 mH
Max. output current (total) [mA]	200
Ethernet transmission rate [Mbit/s]	100
Number of switchable IOs	6
Number of outputs	2
Number of inputs	2
Encoder functions	Yes

Classification Reference Features
Sensor (image analysis)	27310205	ECLASS 10.1
Sensor (image analysis)	27310205	ECLASS 11.0
Sensor (image analysis)	27310205	ECLASS 11.1
Sensor (image analysis)	27310205	ECLASS 12.0
Sensor (image analysis)	27310205	ECLASS 13.0

Description	Application	Industry
Check the right type of fuel filler necks	Classification AI	Automotive industry
Checking the right spring type	Classification AI	Assembly & Handling
Pad Printing Inspection	Inspection (AI)	Packaging technology , Plastics technology
Check the right type of switches on the dashboard	Classification AI , Inspection (AI)	Automotive industry
Check the right type of fuel hoses and clips	Classification AI , Inspection (AI)	Automotive industry
Food Production: VISOR® Displays Information	Classification AI	Food & Beverages
Automated Detection of Manufacturing Defects in Metal Parts	Inspection (AI)
Quality Control on Injection Molded Parts	Inspection (AI)	Plastics technology
VISOR®: Precision Injection Molding Control with Inspection Results in Real Time	Inspection (AI)	Plastics technology
Measuring a gap between two metal sheets	Inspection (AI)	Automotive industry , Assembly & Handling
Check of the correct feeding of screws in the right position	Inspection (AI)	Automotive industry , Assembly & Handling
Control of safety and identification labels	Inspection (AI)	Automotive industry , Packaging technology
Presence check of protective caps	Inspection (AI)	Automotive industry , Electronics
Position control of the fastening clips of cable harnesses	Inspection (AI)	Automotive industry , Electronics
Locking check of the connections	Inspection (AI)	Automotive industry , Electronics
Visualisation of entire process with SensoWeb	Inspection (AI) , Identification , Positioning , Classification AI	Automotive industry , Assembly & Handling , Robotics , Electronics , Food & Beverages , Plastics technology , Laboratory automation , Pharmaceuticals & Cosmetics , Solar industry , Packaging technology
Monitoring the correct application of lubricant	Inspection (AI)	Robotics , Assembly & Handling
Presence of clips on sheet metal parts	Inspection (AI)	Assembly & Handling , Automotive industry

V10C-OAI-A3-W-N-M2-L

Description

MG 3A

CI L4MG/RJ45G-GS-5m-PUR

C L12FG-S-5m-PUR

Contacts