Skip to main content

Robótica

Robótica guiada por imágenes: los «ojos» del robot

Hoy en día, la automatización es inconcebible sin robots en muchos sectores de la industria: en particular, los sistemas de robots colaborativos (cobots), que pueden trabajar codo con codo con las personas, se han generalizado en los últimos años. Los sensores de visión de SensoPart actúan como los «ojos»  de los cobots.

Nuestro experto en robótica, VISOR® Robotic, proporciona al robot toda la información necesaria sobre la posición de las piezas. Estos datos se convierten en coordenadas del robot dentro del sensor antes de su transmisión, de modo que el robot pueda agarrar la pieza con precisión.  Las funciones especiales, como la comprobación del espacio de la pinza y la compensación del punto de agarre, ofrecen una mayor seguridad para la automatización de las tareas de manipulación. Adicionalmente, se pueden emplear sensores de distancia en caso de ser necesario: Nuestra gama abarca desde el sensor subminiatura FT 10-RLA, el sensor óptico de distancia más pequeño del mundo, hasta el modelo FT 55-RLAM, especialmente versátil. Esto garantiza que el robot siempre pueda agarrar con precisión las piezas, a pesar de las variaciones en su forma y posición.

Easy.Robot.Vision.

Paso a paso hasta el producto terminado

Los robots colaborativos se emplean con frecuencia en las líneas de producción de bienes de consumo, como en nuestro ejemplo con las herramientas eléctricas. La alta calidad y la eficiencia de los procesos son esenciales en cada etapa.

Los sensores ópticos y de visión de SensoPart se emplean por sus características específicas y su facilidad de uso en cada etapa de su proceso, paso a paso hasta el producto terminado:

Demostración de robótica industrial

Smarte Vision- und Sensorik-Lösungen für Robotikanwendungen Folleto (pdf, 2.40 MB)

Conexión sencilla a sistemas robóticos de los principales fabricantes

El sensor de visión VISOR® Robotic se desarrolló específicamente para abordar los desafíos en aplicaciones robóticas. Gracias a sus interfaces integradas y estandarizadas, puede incorporarse fácilmente a las instalaciones existentes y a los sistemas robóticos de los principales fabricantes.

Las aplicaciones y los módulos de función especialmente desarrollados permiten una comunicación fluida entre el sensor de visión y el robot, y facilitan considerablemente la configuración, el funcionamiento y el intercambio de datos. Esto permite una rápida integración del sensor en numerosas aplicaciones.

Fácil conexión con soluciones de fabricantes líderes

Además de las aplicaciones y los módulos de función desarrollados por SensoPart, la configuración de las aplicaciones robóticas también se simplifica gracias a las ofertas de otros proveedores de soluciones.

Por supuesto, la cooperación de estos programas con nuestro VISOR® Robotic funciona sin problemas. Sus herramientas adicionales hacen que la comunicación con los robots, así como su configuración y funcionamiento, resulten aún más cómodos, y amplían considerablemente sus posibilidades.

Ejemplos de aplicación

Los siguientes ejemplos de aplicación le muestran los posibles usos de nuestros productos en la práctica.

Filtrar ejemplos de aplicación

32 Los ejemplos de aplicación coinciden con sus criterios de búsqueda

 
Descripción
Aplicación
Descripción
Automated Food Packaging with Robot and Smart Camera

In the food industry, packaging is often automated and handled by robots. These robots pick up food from the conveyor belt and place it into the correct packaging. To achieve this, a vision camera is needed to accurately determine the X and Y positions of the food on the belt and send this information to the robot. At the same time, the system should verify details such as size, diameter, deviations, and cooking level.

Aplicación
Positioning
Descripción
Automated Gripping of Baked Goods on a Conveyor Belt

In an industrial bakery, rolls, pancakes, donuts, and bagels are produced on an automated production line. After coming out of the oven, these baked goods must be removed from the conveyor belt and placed in boxes by a robot. At the same time, the degree of browning of each item must be assessed to ensure quality.

Aplicación
Inspection (AI)
Positioning
Descripción
Automated Screw Fastening of Electrical Components

In electronics manufacturing, printed circuit boards (PCBs) are often fastened automatically by robots—for example, in control units, battery packs, or other assemblies. To ensure precision and reliability, the robot needs accurate information about the PCB's position and the exact location of each screw hole. A vision sensor handles this task by confirming the PCB is correctly positioned and providing the robot with precise screw point coordinates.

Aplicación
Positioning
Descripción
Automated assembly of electrical plug connections

The modules installed in the high-voltage battery must be electrically connected to each other, and the connectors must be applied accurately to avoid damage.

Aplicación
Positioning
Descripción
Automated bolting of the upper housing part

The upper part of the housing must be screwed to the lower part of the housing. To do this, the sensor must detect the position of the screw holes in the housing top.

Aplicación
Positioning
Descripción
Automated fastening on the conveyor belt

In the production of electronic components, components must be screwed together. Automating this process helps screw as many components as possible in the shortest time without compromising quality. To achieve a short cycle time, screwing operations are performed continuously while components move along the conveyor belt, ensuring a fast and efficient process

Aplicación
Positioning
Descripción
Automatic dispensing of lubricant

This process requires millimetre precision so that no spreading or smearing occurs when dispensing lubricants. Lubricant must be accurately applied in sufficient quantity to guarantee proper functioning. If too much lubricant is dispensed, malfunctions will occur.

Aplicación
Positioning
Descripción
CNC machine tending

When processing metal parts in lathes or milling machines, the raw materials must be clamped in the machine before the machining. In addition, each machine requires the right tool for the respective machining operation, and it must be changed regularly depending on the material and the end product. These processes are among the central tasks in machining production and require a high degree of precision and repeatability. Trained specialist personnel are required for clamping the workpieces and changing tools.

Aplicación
Positioning
Descripción
Effortless Traceability: Displaying code contents, texts,

In modern manufacturing, the need for seamless component traceability (Track-and-Trace) continues to grow. Data Matrix Codes (DMCs) have emerged as one of the most reliable methods for identification and traceability. The goal is to scan the Data Matrix Code on each component, guaranteeing precise product processing and flawless serial number management.

Aplicación
Identification
Descripción
Inserting battery modules into the housing bottom part

In order for the robot gripper to be able to insert the components into the lower part of the housing, contactless position detection of the housing bottom part is necessary. 

Aplicación
Positioning
Descripción
Localization of the AGV/AMR position for various applications

In modern production environments, objects must be transported reliably and efficiently from position A to position B to enable the next processing steps. One way to meet these logistical challenges is to use automated guided vehicle systems (AGVs) or autonomous mobile robots (AMRs). Precise localization and navigation of these mobile transport robots is crucial for a smooth material flow – especially if they are intended to support automated assembly, loading or transfer processes.

Aplicación
Positioning
Descripción
Material feed from a carrier (casing parts)

Components for the production process are supplied in load carriers.  The challenge is to position the load carriers as precisely as possible, as this is imperative for a stable, robot-aided handling process. 

Aplicación
Detection
Positioning
Descripción
Monitoring the correct application of lubricant

High precision is of utmost importance during the application of lubricant. However slight irregularities may occasionally occur, which can compromise the production process. It is therefore important to detect potential errors at an early stage.

Aplicación
Inspection (AI)
Descripción
Palletisation of packaging

Once packed, the end products must be stacked on transport pallets. However, the position of the boxes can fluctuate as they arrive, and their density on the conveyor belt can also change due to different cycle times.

Aplicación
Detection
Positioning
Descripción
Placement of electronic components in casing

In electronics manufacturing, processes often require the handling of very delicate or particularly small components. When placing a control chip, as in this example, no gripper errors may occur, as damage must be avoided under all circumstances.

Aplicación
Positioning
Descripción
Position detection for automated bolting

The battery modules must be screwed into the lower part of the housing. The screw holes are usually located under mechanical devices, which in turn have an opening. The sensor is to be used to detect the position of the screw holes underneath.

Aplicación
Positioning
Descripción
Position detection for removal of the upper housing part

In order to close the battery pack, the housing top must be removed from a material container using a gantry or articulated-arm robot. To do this, it is first necessary to determine the position of the component in the container without contact.

Aplicación
Positioning
Descripción
Position detection of the lower housing part in the material container

The base of a battery pack is the housing bottom part, which is first removed from a material container by a gantry or articulated-arm robot. For his purpose, it is necessary to determine the position of the component without contact.

Aplicación
Positioning
Descripción
Position determination for the removal of battery modules

Several components, such as battery modules, are installed in a battery pack. To remove the individual battery modules, their position in the material container must be determined without contact. 

Aplicación
Positioning
Descripción
Position determination of load carriers for autonomous storage and retrieval Cover Home Applications & Industries Applications The task Driverless transport systems (AGV) or automated guided vehicles (AGV) enable flexible design of logistics processes. In

Driverless transport systems (AGV) or automated guided vehicles (AGV) enable flexible design of logistics processes. In order for the AGV to pick up the load carrier at the right place and then set it down, it must be provided with a trigger signal using an optical sensor. The sensor should detect the load carrier at a specific position in the flow rack.

Aplicación
Detection
Positioning
Descripción
Positioning of sniffer lances for leak testing

Leak testing is one of the last production steps of a battery pack. So-called sniffer lances must be precisely guided to specific positions for the gas check.

Aplicación
Positioning
Descripción
Precise handling of large components with robots and VISOR®

In the automotive industry, it is often necessary to automate the movement of large objects, such as sheet metal, for car body construction. The precise detection of the X and Y position of the component using a vision sensor is critical to ensure a precise gripping process for the robot.

Aplicación
Positioning
Descripción
Presence Detection in Robotic Grippers

Bauteile sollen mithilfe eines Doppelgreifers aus einer Maschine entnommen werden. Lichttaster sind erforderlich, um die Anwesenheit der Teile zuverlässig an den Roboter zu signalisieren. Bei einem Greifprozess muss überprüft werden, ob das Objekt korrekt gegriffen wurde. Beim Ablegen kann es vorkommen, dass das Objekt am Greifer hängen bleibt und der Roboter beim nächsten Greifprozess einen Crash fährt. Es werden also zwei Schaltpunkte benötigt. Ein Schaltpunkt, um den korrekten Sitz zu prüfen und ein Schaltpunk, um zu prüfen, ob der Greifer leer ist.

Aplicación
Detection
Descripción
Robot feeder system with a vibrating conveyor

In addition to materials being fed in universal load carriers, high flexibility can be achieved by using a bulk storage bin with a vibrating feeder arrangement. This is particularly suited to transporting small parts, such as mechanical components either plastic or metal.

Aplicación
Positioning
Descripción
Robot-assisted refueling of AGVs (with Target Mark 3D)

Utilizing robotic assistance, AGVs can be automatically refueled or recharged. The robot will dock the charging system or fuel port to the AGV, streamlining the process.

Aplicación
Positioning
Descripción
Robotic assembly on AGVs (with Target Mark 3D)

A robot is tasked with performing various processing steps on a battery pack, which is transported into the processing cell by an AGV

Aplicación
Positioning
Descripción
Screw assembly of components

When screwing the outer casing of the cordless screwdriver together, several parameters must be observed – from the order of the screws to the different tightening torque for the individual screws. The varied positions at which the parts are fed complicates the process step even further.

Aplicación
Positioning
Descripción
Transfer to test station

The flexible use of mobile robots is an attractive solution for machine tending processes. Yet this flexibility can cause robot positions to be comparatively imprecise.

Aplicación
Positioning
Descripción
VISOR® Makes Component Positions Visible

A robot is tasked with picking components from a flexible feeding platform. The position of the objects may vary. A vision sensor can identify and relay the exact position of the part to the robot.

Aplicación
Positioning
Descripción
VISOR® Robotic +Z: 2D vision-guided robotics with integrated distance measurement

2D vision-guided robotics with integrated distance measurement for removing body parts from load carriers.

Aplicación
Distance measurement
Positioning
Descripción
Visualisation of entire process with SensoWeb

Throughout the production process, a large quantity of data is generated that has to be monitored and checked. The operator must be able to consult, manage and evaluate this data easily in order to identify and implement any necessary modifications to the process.

Aplicación
Classification AI
Identification
Inspection (AI)
Positioning
Descripción
Wafer box handling in the semiconductor industry

In modern semiconductor factories (fabs), wafer boxes, such as front-opening shipping boxes (FOSBs) or front-opening universal pods (FOUPs), are currently still often transported manually from station to station. These boxes are used for the safe transportation and temporary storage of sensitive wafers during the production process and must be handled with extreme care.

Aplicación
Positioning

Robotics@SensoPart

ROPTIX 3D® - AI-based bin picking of transparent objects
Base Shift Explained: From Position Correction to Workpiece Alignment
Compensating AGV Docking Tolerances in Electronics Assembly with VISOR®
Automatic Base-Eye Calibration for SCARA Robots | VISOR® Robotic
Precision PCB Assembly with SCARA Robot & End-of-Arm Vision | VISOR® Robotic
SCARA and Gantry Robot Calibration - VISOR® Robotic
Reliable Semiconductor Test Head Positioning with VISOR® and esmo ares evo
Precise positioning for flexible automation - Robot Handling with Target Mark 3D
ROPTIX 3D® - Bin picking transparent objects
ROPTIX 3D® - Bin picking of cylindrical objects
ROPTIX 3D® - Bin picking of shiny sheet metal plates
RIBE Elektroarmaturen on Using Vision Sensors in Assembly Automation

我们的网站有多种语言版本。我们已检测到您的浏览器语言为 "中文".